Concrete Curing Heating Cable

• Customization: Available
• After-sales Service: Replacement
• Warranty: 3years
• Model NO.: BHS
• Certification: CE
• Heating Type: Electric Heating Systems
• Power Cable Length: 2m
• Wattage: 40W/M
• Voltage: 230V
• Cable Length: 3.3 . 10. 20. 35 .55 . 85
• Transport Package: Shrinkwrap
• Origin: China
• HS Code: 85168000
• Production Capacity: 500PCS/Day

Product Description

CONCRETE CURING HEATING CABLE 
CONCRETE CURING HEATING CABLE kit
CONCRETE DRYING HEATING CABLE 
CONCRETE DRYING HEATING CABLE kit

wattage 40w/M @230V
length : 3.3M,  10M. 20M. 35M. 55M. 85M
rubber power cable length with euro plug :2M
function :help concrete construciton to dry and free of freeze in winte 

features :
1. max heating temp around 90degree 
2. cable jacket and power cable resistant to -40ºC.
3. discarded in concrete after use .
4. preassambled with plug.

packing: one set with manual in shrinkwrap.

In the pursuit of excellence in the construction of residential buildings and other structures, while increasing the efficiency of production facilities, the latest technologies are actively used. One of these technical solutions is the use of heating cables, the laying and connection of which can be done by hand. In the construction of any objects, a high-quality foundation, on which a building or house stands, is of paramount importance. Usually, concrete mixes are used to fill the foundation or slab. In order for buildings to withstand any loads on the foundation in the future, you need to use a mixture of excellent quality for it. The foundation itself should be ready for the erection of walls and subsequent ceilings above it, that is, it is necessary to wait a certain period in order for the concrete to harden to complete. At high temperatures and air humidity, hardening is faster, and at low temperatures it slows down. Exposure to zero and negative air temperatures can stop the setting process. The optimum temperature for solidification is 20-30 degrees above zero, the humidity should not be lower than 90%. Under laboratory conditions, it was found that hardening occurs most actively under the described conditions in the first week after pouring. During this period, concrete can gain up to 70% of its strength. 100% brand strength reaches 28 days .

 

In real conditions, the air temperature cannot be constant: it is higher during the day, it decreases at night, and the humidity also changes at different times of the day. Therefore, experts recommend to wait with the erection of buildings on the ground a few more days. Thus, it is possible to continue construction work no earlier than a month after pouring. 28 days is the control time for the concrete to set. But in some cases it is necessary for the concrete setting process to proceed faster. This applies to work carried out in the winter, or the necessary removal of objects in the early stages. For such cases, you can speed up the process of solidification tenfold. Since concrete matures faster at high temperatures and humidity, electrical heating cables may be used for drying and hardening of concrete in new buildings. Hardening usually takes 28 days, depending on climate and temperature. By installing heating cables this time can be reduced.
heating cable for curing and drying concrete, as well as heating. The system speeds up concrete curing and enables faster formwork dismantling. The heating cable, which is fixed to the reinforcement, can be reconnected at a later stage for effective drying or heating. With HRBHS concrete curing cables, you have a smart and energy-efficient way of curing quickly and being able to dismantle formwork quickly even in temperatures below zero.in-concrete heating cable can be used in humid places. Multi-layer XLPE material, the mechanical strength of the product can reach class. M2, and will not be deformed in short-term exposure up to 150°C. And the cable is prepared with plug, ready for use.

length  M	wattage  :W
3.3	130
10	400
20	735/800
35	1400
55	2200
85	3200/3400